品格為ICF International Inc提供高級翻譯(CHI→ENG)，翻譯內容：歐盟碳排放權交易體系。
真實譯文展示（如有保密內容均以XX替代）
Sample of real translation (Confidentiality retained with XX)
……
Eu ets: Choice of EMISSIONS monitoring methodology and ASSOCIATED conditions
歐盟碳排放權交易體系：排放監測方法的選擇及相關條件
- The MRR allows operators to choose either a calculation-based methodology or a measurement-based methodology to determine the emissions from an installation.
- Calculation-based methodology: Emissions determined either by a standard approach of multiplying the activity data concerning each source stream by relevant calculation factors, or by a mass-balance approach.
- Measurement-based methodology: Emissions determined by means of continuous measurement of the concentration of the relevant greenhouse gas in the flue gas of each emission source, multiplied by the corresponding measurement of flue-gas flow.
- Subject to competent authority approval an installation can employ a combination of the different methodologies.
- Whatever approach is applied, the operator also needs to meet the other conditions specified by the MRR, including in relation to required tiers.
- 監測與報告法規允許經營者選擇基于計算的方法或基于測量的方法，用于確定裝置的排放量。
- 基于計算的方法：通過標準方法，將各源流的相關活動數據乘以計算系數，或通過質量平衡法，確定排放量。
- 基于測量的方法通過持續測量各排放源煙氣中的相關溫室氣體濃度，乘以對煙氣流的相關測量結果，確定排放量。
- 在獲得主管部門審批后，裝置可以采用不同方法的組合。
- 無論采用哪種方法，經營者還需要符合監測與報告法規規定的其他條件，包括與必要層級有關的條件。
Eu ets EXPERIENCE OF CEMS
歐盟碳排放權交易體系使用CEMS的經驗
- Despite the option to apply either a calculation-based or a measurement-based approach to determine emissions, use of CEMS for EU ETS compliance remains very limited.
- Some operators have extensive experience of using CEMS in relation to other legislation for pollutants other than CO2, but this tends to be only where measurements of concentration are required.
- Representative measurement of flow, and the added expense, is of particular concern.
- One industry sector unofficially mentioned an unpublished trade association study demonstrating systematic differences in flow measurements compared to calculation of 5-10%, and emphasised the utmost importance of corroborating calculations to identify where something is wrong so that corrective action can be taken.
- Most EU ETS operators are small with limited (or nil) in-house technical expertise and infrastructure available to support CEMS.
- Many of the larger better resourced installations have multiple emission points and have found it more economical and efficient to calculate their emissions instead.
- 雖然在確定排放量時可以自行選擇采用基于計算或基于測量的方法，但歐盟碳排放權交易體系中對CEMS的使用非常有限。
- 一些經營者因為在除二氧化碳以外的其他污染物立法方面，積累了使用CEMS的豐富經驗，但這僅限于需要測量濃度的情況。
- 尤其是對流量和額外成本進行代表性測量。
- 一個工業部門非正式地提到一項未發布的行業協會研究，證明流量測量結果與5%至10%的計算結果之間存在系統性差異，并強調了確證計算對于識別錯誤和采取糾正措施的重要性。
- 歐盟碳排放權交易體系的大多數經營者規模較小，可用于支持CEMS的內部專業技術知識和基礎設施有限（甚至為零）。
- 許多資源更充足的大型裝置有多個排放點，并發現計算排放量更經濟、更高效。
……
上一篇：品格為輝瑞制藥提供高級翻譯，語種：CHI→ENG，翻譯內容：宣傳片字幕
下一篇：品格為中國環境科學研究院提供CHI→ENG母語級翻譯，翻譯內容：《生態文明與中國實踐》（提交給COP15）。